电 话:021-39526590
联系人:单荣兵
手 机:19117262520
地 址: 中国 上海 嘉定区嘉涌路99弄6号713
更新时间:2022-11-18 浏览数:33
所属行业:机械设备> 气动元件(机械、工业制品、行业设备)> 气缸
发货地址:
产品规格:--
产品数量:1
包装说明:--
单 价:面议
特性力士乐拉杆气缸,R911298374
上海乾拓贸易有限公司
企业QQ:2880626087
电话;
手机;(微信)
邮箱;@163.com
联系人;周彩云
地址:上海市嘉定区江桥嘉涌路99弄6号713室
标准ISO 6431
压缩空气连接尺寸内螺纹
Cylinder tube aluminum, anodized
Piston rod chrome plated
Front cover aluminum
Back cover aluminum
Sealed acrylic gum
■ The pressure dew point must be at least 15 ° C below the ambient
and medium temperature and the maximum permissible temperature is 3 ° C.
■ Diameter 25 mm Not implemented according to ISO 6431
压缩空气中的含油量0 mg/m? - 5 mg/m?
确定活塞推力的压力6 bar
材料:
气缸管子铝材, 阳极氧化处理
■ 只可使用经过 AVENTICS 公司许可的油,
■ The oil content of the compressed air must remain constant throughout its life.
■ Only oil approved by AVENTICS is available, see the section "Technical Information".
工作压力范围2 bar / 10 bar
环境温度范围-20°C / +75°C
活塞杆镀铬
前端盖板铝材
后盖铝材
密封丙烯树胶
■ 压力露点必须至少低于环境和介质温度15 °C,并且允许 的高温度为 3 °C。
■ 压缩空气的油含量必须在整个使用寿命中保持不变。
介质温度范围-20°C / +75°C
介质压缩空气
颗粒大小 max. 50 μm
material:
■ 直径 25 mm 未根据 ISO 6431 标准执行
特性力士乐拉杆气缸,R911298374