电 话:021-39526590
联系人:单荣兵
手 机:19117262520
地 址: 中国 上海 嘉定区嘉涌路99弄6号713
更新时间:2022-11-18 浏览数:21
所属行业:机械设备> 气动元件(机械、工业制品、行业设备)> 气缸
发货地址:
产品规格:--
产品数量:1
包装说明:--
单 价:面议
原装安沃池双活塞气缸,PV7-1A/25-45RE01MC0-08
上海乾拓贸易有限公司
企业QQ:2880626087
电话;
手机;(微信)
邮箱;@163.com
联系人;周彩云
地址:上海市嘉定区江桥嘉涌路99弄6号713室
环境温度范围+0°C / +60°C
介质压缩空气
Oriented bushing aluminum, anodized
■ The pressure dew point must be at least 15 ° C below the
■ 只可使用经过 AVENTICS 公司许可的油,
外壳铝材, 阳极氧化处理
正面板钢 镀锌
material:
Shell aluminum, anodized
Positive plate steel galvanized
Sealed acrylic gum
■ 压缩空气的油含量必须在整个使用寿命中保持不变。
■ Only use oil approved by AVENTICS,
■ for piston diameter? 6: magnetic sensor necessary fastening parts
■ The sensor mounting device is only used for the installation of the piston
■ 适用于活塞直径 ? 6: 磁性传感器必需的紧固零件
■ 传感器固定设备仅用于活塞 ? 6 的安装
Ambient temperature range + 0 ° C / + 60 ° C
Media compressed air
Particle size max. 5 μm
ambient and medium temperature and the maximum permissible temperature is 3 ° C.
■ The oil content of the compressed air must remain constant throughout its life.
颗粒大小 max. 5 μm
压缩空气中的含油量0 mg/m3 - 1 mg/m3
确定活塞推力的压力6,3 bar
材料:
密封丙烯树胶
导向衬套铝材, 阳极氧化处理
■ 压力露点必须至少低于环境和介质温度15 °C,并且允许 的高温度为 3 °C。
Oil content in compressed air 0 mg / m3 - 1 mg / m3
Determine the pressure of the piston thrust 6,3 bar
原装安沃池双活塞气缸,PV7-1A/25-45RE01MC0-08