电 话:021-39526589-8004
联系人:冯娇
手 机:17316599802
地 址: 中国 上海 嘉定区嘉涌路99弄6号713

更新时间:2022-11-18 浏览数:54
所属行业:电子> 集成电路/IC> 放大器
发货地址:
产品规格:--
产品数量:1
包装说明:--
单 价:面议
不二越比例放大器原理,供应NACHI比例放大器
电磁比例压力控制阀、电磁比例流量
控制阀、电磁比例方向控制阀驱动专
用放大器,备有放大型和控制型两种。
Electromagnetic proportional pressure control valve, electromagnetic proportional flow
Control valve, electromagnetic proportional directional control valve drive
With the amplifier, with two kinds of amplification and control.
放大型基本上是把直流电压0?10V范
围内的指示电压转换为0?900mA的直
流电,向控制阀提供足够的电流。
控制器靠外部接点的ON–OFF信号来
对输出电流进行多段控制。
Z Power supply voltage Please use any series of 100V or 200V.
X Please avoid high temperature and humidity, and choose places with less vibration and dust.
C Use the shielded cable for analog signal lines and valve output power signal lines.
V When using the relay control valve to output the power signal,
c模拟信号线与阀输出功率信号线请使用屏蔽线。
v用继电器控制阀输出功率信号时,
请将浪涌吸收器或者变阻器与继电器并联。
Please connect the surge absorber or rheostat in parallel with the relay.
Amplifier is basically a DC voltage of 0 ~ 10V Fan
The indication of the voltage within the switch is 0 ~ 900mA straight
Flow, to the control valve to provide sufficient current.
The controller is connected to the ON-OFF signal of the external contact
The output current for multi-stage control.
z电源电压请使用100V或200V的任一系列。
x设置时请避免高温多湿,并选择振动和灰尘较少的场所。
不二越比例放大器原理,供应NACHI比例放大器