021-39529839
电 话：021-39526589-8004
联系人：覃小敏
手 机：19117262520
地 址： 中国 上海 嘉定区嘉涌路99弄6号713
更新时间：2022-11-18 浏览数：73
所属行业：仪器仪表> 阀门> 流量控制阀
发货地址：日本油研
产品规格：--
产品数量：1
包装说明：--
单 价：面议
YUKEN压力控制阀技术，原销油研控制阀
上海乾拓贸易有限公司
企业QQ：2880626087
电话；
手机；（微信）
邮箱；@163.com
联系人；杨婷玉
地址：上海市嘉定区江桥嘉涌路99弄6号713室
type of hydraulic fluids listed in the table below can be used.
Note: For use with hydraulic fluids other tha
H/HC TYPE PRESSURE CONTROL VALVES
HT/HG上面列出的，请事先咨询您的Yuken代水）直接到坦克，背压接近大气压力。
有两个螺纹连接主压力端口。 他们可以连接
当使用磷酸酯流体时，前缀“F-”
由于特殊的密封，到了。el
使用相当于ISO VG32或VG46的流体。
HCT/HCG-03/06/10(3/8,3/4,1-1/4)
pressure rise in the circuit, sensed either internally or
HC Type Pressure Control Valves
These valves are hydraulically damped, direct operated
pressure control valves which can be actuated by
internal or external pilot pressure. They are available
with integral check valves for use when free reverse flow
from secondary port to the primary port is desired.
There are various types of valve including sequence and
counterbalance valves, all of which are operated by a
pressure rise in the circuit, sensed either internally
or remotely.Threaded Connections/Sub-plate Mounting
Up to 21 MPa (3050 PSI), 500 L/min (132 U.S. GPM)
H Type Pressure Control Valves
These valves are hydraulically damped, direct operated,
pressure control valves which can be actuated by表。
使用磷酸酯或多元醇酯液。要调节压力，请松开锁紧螺母，顺时针旋转压力调节螺丝以增加压力
或逆时针以减少压力。 调整后，请勿忘记拧紧锁紧螺母。
连接类型1和4（内部排水口）的二级侧压力端口和类型2和3的排水口（外部）
internal or external pilot pressure. There are various
types of valve including sequence, unloading and low
pressure relief valves, all of which are operated by a
Viscosity ranging between 15 - 400 mm2 /s (77 - 1800 SSU).
Oil temperatures between -15/+70°C (5 - 158°F).
Use hydraulic fluids which satisfy the recommended viscosity and
YUKEN压力控制阀技术，原销油研控制阀
您是第33114157位访客
公司主营：德国SICK传感器，FESTO比例阀，德国FESTO电磁阀，ASCO电磁阀，NORGREN电磁阀，LEUZE传感器，CKD电磁阀，CKD气缸 沪ICP备09006758号-10
乾拓贸易是销售气缸,继电器的公司,以SMC气缸,PILZ继电器,FESTO气缸为主,产品型号规格齐全,报价合理,可满足不同客户的需求!
版权所有：上海乾拓贸易有限公司
