电 话:021-39526589-8004
联系人:覃小敏
手 机:19117262520
地 址: 中国 上海 嘉定区嘉涌路99弄6号713

更新时间:2022-11-18 浏览数:63
所属行业:化工> 阀门> 溢流阀
发货地址:日本油研
产品规格:--
产品数量:1
包装说明:--
单 价:面议
油研先导式溢流阀,进口YUKEN阀
上海乾拓贸易有限公司
企业QQ:2880626087
电话;
手机;(微信)
邮箱;@163.com
联系人;杨婷玉
地址:上海市嘉定区江桥嘉涌路99弄6号713室
的粘度和油温
粘度介于15 - 400 mm2 / s(77 - 1800 SSU)之间。
油温在-15 / + 70°C(5 - 158°F)之间。
使用满足上述给出的粘度和油温的液压油门型号
洲设计标准N.美国设计标准
-20 Rc 1/4 DGM-02-2080 1/4 BSP.F DGM。These valves are a combination of a pilot operated relief valve
and a solenoid operated directional valve. Piping between the
two is eliminated as the solenoid valve is directly mounted on
the relief valve and connected with the relief valve vent. Pump
pressure may be unloaded remotely by an electrical signal to the
solenoid, or by connecting体类型
油箱管路的管道不应连接到其他阀门的任何油罐管路,而是直接连接到油箱。
液压油 可以使用下表中列出的任何类型的液压油。
必须注意保持控制液压油的污染Japanese Std. "JIS" and European Design Std. N. American Design Std.
Socket Head Cap Screw

BG-10
M12 × 70 Lg. (2 pcs.), M12 × 95 Lg. (2 pcs.)
M16 × 60 Lg. (2 pcs.), M16 × 80 Lg. (2 pcs.)
M20 × 70 Lg. (2 pcs.), M20 × 90 Lg. (2 pcs.)
1/2-13UNC × 2-3/4 Lg. (2 pcs.), 1/2-13UNC × 3-3/4 Lg. (2 pcs.)
5/8-11UNC × 2-1/4 Lg. (2 pcs.), 5/8-11UNC × 3-1/4 Lg. (2 pcs.)
3/4-10UNC × 2-3/4 Lg. (2 pcs.),
否则会导致故障,并缩短寿命
油研先导式溢流阀,进口YUKEN阀