021-39529839
产品分类
联系方式

电 话:021-39526589-8004

联系人:覃小敏

手 机:19117262520

地 址: 中国 上海 嘉定区嘉涌路99弄6号713

产品详情 当前位置: 首页>产品中心

油研溢流阀技术,报价日本YUKEN阀

更新时间:2022-11-18   浏览数:30

所属行业:化工> 阀门> 溢流阀

发货地址:日本油研

产品规格:--

产品数量:1

包装说明:--

单 价:面议

  油研溢流阀技术,报价日本YUKEN阀

  上海乾拓贸易有限公司

   企业QQ:2880626087

   电话;

   手机;(微信)

   邮箱;@163.com

   联系人;杨婷玉

   地址:上海市嘉定区江桥嘉涌路99弄6号713室

  to a cut out pressure

油研溢流阀技术,报价日本YUKEN阀

  (adjusted maximum), the valve acts to divert the pump delivery to the reservoir

  at low pressure, thus the pump is unloaded automatically.

  When the accumulator pressure drops to the cut in pressure (refer to

  characteristic chart on page 5), the valve directs the pump delivery to the

  accumulator and BUCGM-06-20

  M20×70Lg。 (2个)

  M20×160Lg。 (4件)

  5 / 8-11 UNC×2-1 / 4 Lg。 (2个)

  5 / 8-11 UNC×4-1 / 2 Lg。 (2个)

  5 / 8-11 UNC×5 Lg。 (2

  3 / 4-10 UNC×2-3 / 4 Lg。 (2个)

  3 / 4-10 UNC×6-1 / 2 Lg。 (4件)

  北京城建集团-06

  北京城建集团-10

  日本标准“JIS”和欧洲设计标准

  内六角螺钉system.

  An integral check valve prevents reverse flow through the valve from the

  accumulator. In high-low pump circuits, the valve act石油基础油

  使用水 - 乙二醇液体。

  使用磷酸酯或多元醇酯液。

  当使用磷酸酯流体时,由于特殊密封美国设计标准

  These valves are used to operate the pumps with minimum load in accumulator

  circuits or in high-low pump circuits.

  In accumulator circuits, when the system pressure reaches 个),前缀“F-”到型号

  使用相当于ISO VG32或VG46的流体。

  BUCGM-06-2080 3/4 BSP.F

  BUCGM-10-2080 1-1 / 4 BSPs to unload the large volume pump

  油研溢流阀技术,报价日本YUKEN阀

上海乾拓贸易有限公司
覃小敏03:07:13
您好,欢迎光临上海乾拓贸易有限公司,请发送您要咨询的内容。
欢迎访问
上海乾拓贸易有限公司
很高兴能为您服务!
客服 021-39526589-8004
扫一扫
在线咨询
服务热线
021-39526589-8004
19117262520