021-39529839
电 话：028-86751041-8004
联系人：王倩
手 机：15308020014
地 址： 中国 上海 嘉定区嘉涌路99弄6号713
HYDAC流量控制阀有哪些使用方式
上海乾拓贸易有限公司
企业QQ：2880626087
电话；
手机；（微信）
邮箱；@163.com
联系人；杨婷玉
地址：上海市嘉定区江桥嘉涌路99弄6号713室
The flow valve programme encompasses practically all of the functions
for influencing the flow rate which are required in hydraulics. Flow valves
zzNBR：从-30℃至+100℃（电磁阀 - 20℃）
zzFPM：从-20℃至+120℃（所有其他影响见点4）
6.粘度
材料在阀，例如他们的机甲。强度。通常，高温度
主要取决于密封材料。HYDAC定义在这里：tures
zzrelaxation of springs made of spring steel at higher temperatures
There are also deep temperature valves (TT), where the seals are specially designed for low temperatures.
Other influences of temperature:
zzbrittle fracture of steel at low 5. MEDIA抗工温度范围
像环境温度的平均温度。范围对所使用的直接作用ich are designed to operate safely in the voltage range o
f +/- 15% of nominal voltage at max. 60 ° ambient temperature. The combination of steady surge an
d very hot temperatures can result in extreme cases to failure of the ulic modification of throttle
cross-sections. HYDAC offers zzfusing of coils at continous operation under high current and at high temperatures
Filtration and the associated particle size of contaminants in the hydraulic oil is the m
ost important point in the operation of a hydraulic system. Exceeding the specified particle s
ize in the filtration classes 21/19/16 to 18/16/13 may cause immediate failure of the parts in t
he hydraulic system when these particles are accumulated in critical areas.
8. NOMINAL TENSION AND VOLTAGE
In solenoid valves coils are used wh
HYDAC阀可以通常仅在特定的粘度范围在太薄被使用，如或
稠的液体，在保证功能无法实现。这些粘度也各不相同
ENT为不同的阀，但在平均在10毫米的范围内？/ S到420毫米？/ S。
7.污染水平（过滤）temperainfluence the flow rate in a system by means of mechanical or hydra
solenoid valves - 20°C)
zzFPM: from -20°C to +80°C (sometimes up to +100°C)both manually and hydraulically controlled valves in this area
HYDAC流量控制阀有哪些使用方式
您是第33132496位访客
公司主营：德国SICK传感器，FESTO比例阀，德国FESTO电磁阀，ASCO电磁阀，NORGREN电磁阀，LEUZE传感器，CKD电磁阀，CKD气缸 沪ICP备09006758号-10
乾拓贸易是销售气缸,继电器的公司,以SMC气缸,PILZ继电器,FESTO气缸为主,产品型号规格齐全,报价合理,可满足不同客户的需求!
版权所有：上海乾拓贸易有限公司
