电 话:028-86751041-8004
联系人:王倩
手 机:15308020014
地 址: 中国 上海 嘉定区嘉涌路99弄6号713
更新时间:2024-12-16 浏览数:40
所属行业:电子> 其他电子元器件
发货地址:
产品规格:--
产品数量:1
包装说明:--
单 价:面议
供应美国ASCO底温阀,阿斯卡底温阀主要参数
上海乾拓贸易有限公司
企业QQ:2880626087
电话;
手机;(微信)
邮箱;@163.com
地址:上海市嘉定区江桥嘉涌路99弄6号713室
Pipe connection identifier is: B= NPT (ANSI 1.20.3)
The third digit in the catalogue number indicates the standard pipe connection
Other pipe connections are available on request
such as liquid oxygen (-183°C), liquid argon (-186°C) and liquid nitrogen -196°C)
Solenoid valves require a minimum pressure differential of 0,35 bar
MATERIALS IN CONTACT WITH FLUID (?) Ensure that the compatibility of the fluids in contact with the materials is verified
Body Brass Core tube Stainless steel Core and plugnut Stainless steel Springs Stainless steel Seat Brass Seals
PTFE and Lead-Clad Copper Core disc PTFE reinforced Piston Brass Piston disc PTFE Piston rings PTFE (carbon filled) Shading coil Copper
ELECTRICAL CHARACTERISTICS Coil insulation class F Connector Spade plug (Pg 11P) Connector specification ISO
4400 Electrical safety IEC 335 Standard voltages DC (=) : contact us (Other voltages and 60 Hz on request) AC (~) : 24V - 115V - 230V / 50 Hz
Installation/maintenance instructions are included with each valve
Spare Parts Kit and replacement coils are available (see section 11)
All valves are degreased, cleaned, tested and packed to keep them free from moisture. In addition,
liquid oxygen (LOX) valves are 'black light' tested to check for any hydrocarbons
Heavy duty floating piston design for severe applications
The solenoid valves satisfy all relevant EC directives
GENERAL Differential pressure 0,35 - 14 bar [1 bar = 100 kPa] Maximum viscosity 65 cSt (mm2/s) Response times 40 - 120 ms
fluids (?) temperature range (TS) seal materials (?)
cryogenic fluids -196 to +90°C PTFE
All products are covered by the Pressure Equipment Directive 97/23/EC and are suitable for group 1 and 2 fluids
The solenoid valves will withstand the severe service encountered in controlling cryogenic fluids,
Waterproof enclosure with embedded screw terminal coil and Pg 13,5 cable gland to meet CEE-10 (IP67)
Explosionproof enclosures for hazardous locations according to “CENELEC” and national standards (see section 10)
Explosionproof and watertight enclosures according to “NEMA” standards (see section 10)
Compliance with “UL” and “CSA” standards
Manual operator
Plug with visual indication and peak voltage suppression (see section 11)
The valves can be mounted in any position without affecting operation
供应美国ASCO底温阀,阿斯卡底温阀主要参数