电 话:021-39526589-8004
联系人:余玲
手 机:17302157802
地 址: 中国 上海 嘉定区嘉涌路99弄6号713

更新时间:2022-11-18 浏览数:64
所属行业:电子> 开关(电子元器件)> 流量开关
发货地址:
产品规格:--
产品数量:1
包装说明:--
单 价:面议
宝帝叶轮式流量开关好销量,德国burkert流量开关选型参数
上海乾拓贸易有限公司
企业qq:2880626087
电话;
手机;(微信)
邮箱;@163.com
地址:上海市嘉定区江桥嘉涌路99弄6号713室
pn10 (with plastic sensor fitting) - pn16 (with l sensor fitting) see pressure/temperature chart,
next page viscosity / pollution 100 cst. max. / max. 1% (particle size max.: 0.5 mm)
通过一个卡口接头可以将两者快速、简单地相连。
设备通过转接电子设备模块中所包含的簧片开关显示是否存在流量。
quickly and easily connected together by a quarter-turn.
the 8010, which is uni-directional, should be mounted in respect of the arrow that indicates the flow direction.
the device indicates the presence of a flow in the pipe by switching the reed contact contained in the electronic module.
- 带有一个大叶轮 ?区域 2? 适合接头 dn32 至 50。
以低成本集成到管道系统中,不需额外的配管
磁性测量原理
通过调节螺栓简便地设置开关点
inline paddle wheel flow switch
the inline flow sensor/switch type 8010 is specially designed for use in pure and water resembling fluids,
free from air bubbles and magnetizable particles, to monitor minimum/ maximum values of flow.
the sensor/switch is made up of a sensor fitting (type s010) and an electronic module (type se10),
- 无流量关闭 (nc):流量会将触点打开。
叶轮式流量开关,用于监控纯净的、与水类似的液体,
所监控的液体中不能含有可被磁化的颗粒。
开关由一个接头 (s010) 和一个电子设备模块 (se10) 构成,
? mechanical adjustment of setpoint
general data compatibility with sensor fittings s010 inline (see ordering chart) sensor element blade with magnet,
reed contact fitting process connections l plastic internal or external thread, weld ends,
clamp or flange true union, spigot or external thread materials housing,
cover setting screw cable plug materials wetted parts fitting, sensor holder
blade axis / seal
pc, +20% glass fibre reinforced plated brass pa
该 s010 接头带有不同的接口,具有两种结构方式可用:
- 带有一个小叶轮 ?区域 1? 适合接头 dn15 至 40。
the switching points min./max. for rising and falling velocities can be set with a screw within a defined range.
the se10 electronic module is available in two version: - n ormally open (no):
the flow switches on the contact. - n ormally closed (nc): the flow switches off the contact.
these s010 sensor fittings are available in two versions:
- w ith a short blade “range 1” fitted for the fittings dn15...dn40. - w ith a long blade “range 2” fitted for the fittings dn32...dn50.
valve alarm
brass (cuzn39pb2), stainless steel (316l - 1.4404), pvc, pp, pvdf pvdf stainless steel (316l) / fkm (epdm on request)
electrical connection cable plug: en (provided) connection cable 0.14...0.5 mm2 cross section; max. 100 m length
complete device data (sensor fitting + electronic module) pipe diameter dn15...dn50 switching range 4.7...75.4 l/min
(see selection table - on page 3) flow velocity max. 10 m/s medium temperature with sensor fitting in pvc pp,
pvdf, brass, stainless steel 0...+50°c (+32...+122°f) 0...+55°c (+32...+131°f) medium pressure max.
type 8010 can be combined with...
? economic integration in pipe systems without any additional piping
? magnetic measuring principle
可针对递增和递减的流动速度,通过一个位于电子设备模块上的调整螺栓
在特定的范围内对“小/大”开关点进行调整
。可提供两种 se10 电子设备模块:- 无流量打开 (no):流量会将触点闭合。
宝帝叶轮式流量开关好销量,德国burkert流量开关选型参数