021-39529839
电 话：021-39526589-8004
联系人：余玲
手 机：17302157802
地 址： 中国 上海 嘉定区嘉涌路99弄6号713
更新时间：2024-12-16 浏览数：32
所属行业：电子> 传感器、敏感元器件(电子元器件)> 流量传感器
发货地址：其他
产品规格：--
产品数量：1
包装说明：--
单 价：面议
供应德国BURKERT磁感式流量传感器，宝德流量传感器应用
上海乾拓贸易有限公司
企业QQ：2880626087
电话；
手机；（微信）
邮箱；@163.com
地址：上海市嘉定区江桥嘉涌路99弄6号713室? item no. of the electronics Type SE56 (see corresponding data sheet or Ordering chart on page 7)
Data complete flowmeter 8054/8055 - (S054/S055 sensor fitting + SE56 electronics) Pipe diameter DN25...DN200 [to DN2000]
Measuring range 0...0.72 m3/h to 0...1130 m3/h Process connection S054: wafer - S055: Flange EN1092-1, ANSI B16-5, [JIS]
Medium temperature see medium temperature chart on page 3 Medium pressure max.
The complete full bore magflowmeter Type 8054/8055,
which consists of a magnetic sensor fitting Type S054 or S055 connected to an electronics
Type SE56 (blind in compact version or with display in compact or remote version),
is designed for applications with liquids with a minimum conductivity of 5 μS/cm.
Combined with a valve as the actuating element, the complete full bore magflowmeter
Type 8054/8055 can control high-precision dosing operations
? For water treatment and general purpose applications
Environment Ambient temperature with SE56 standard SE56 basic
-20...+60°C (-4 ...+140°F) (operating and storage) -10...+50°C (+14...+122°F)
(operating), -20...+50°C (-4...+122°F) (storage) -20...+40°C (-4...+104°F) (operating and storage)
? Version without (S054) or with (S055) flanges
* Vacuum resistance 200 mbar (2.9 PSI) absolute at 100°C (212°F) Measurement deviation1) 2) ± 0.2% of reading (SE56 standard;
SE56 blind) ± 0.8% of reading (SE56 basic) Repeatability ± 0.1% (SE56 standard; SE56 blind) ± 0.2% (SE56 basic)
Minimum conductivity 5 ?S/cm (or 20 ?S/cm with demineralized water) * on request
1) under reference conditions: water temperature = 20°C, ambient temperature = 25°C,
constant flow rate during the test, liquid speed > 1 m/s 2) =“measurement bias” as defined in the standard JCGM 200:2012
Type 8054/8055 can be combined with...
IP68 (remote version and junction box filled with resin, SE56 standard);
IP65 (compact version, SE56 basic) Standards and directives The applied standards,
which verify conformity with the EU Directives,
Standards, directives and certifications Protection class IP65 and IP67 (compact version,
SE56 standard or SE56 blind); IP65 (remote version, SE56 standard),
PN16 (232 PSI) (with PP lining) or [up to PN64 (928 PSI) (with Ebonite or PTFE lining)]
and processed by an electronics (SE56) which outputs an electrical signal proportional to the fluid flow velocity respectively to the flow rate.
Faraday’s induction law is the basis for this magnetic flow measurement.
? Combination of magflowsensor fitting S054 or S055 and electronics SE56
and flow measurements in potable water treatment and waste water treatment.
General data - S054/S055 sensor fitting Compatibility SE56 electronics
(see corresponding data sheet) Materials Body Electrode (3 in standard)
Carbon steel painted [or stainless steel 304 or 316]* Stainless steel 316L [or Hastelloy C, Titanium, Tantalum,
Platinumrhodium]* PP (max. 16 bar), ebonite [or PTFE]* FKM or EPDM* (with PP lining)
[or without gasket (with Ebonite or PTFE lining)] Electrical connection 2 cable glands PG9
? Continuous measurement or Batch Control
can be found on the EU Type Examination Certificate and/or the EU Declaration of conformity (if applicable)
Ordering information for complete flowmeter Type 8054/8055
A complete flowmeter Type 8054 respectively 8055 consists of a sensor fitting S054 or S055 and an electronics SE56.
The following information is necessary for the selection of a complete flowmeter:
? item no. of the sensor fitting Type S054 or S055 (see Ordering Chart on page 6)
The sensor fitting Type S054 or S055 consists of a stainless steel pipe section internally lined with insulating material.
Two electrodes mounted opposite to each other on the internal surface of the tube generate an electrical signal.
The coils generating the magnetic field are placed outside the pipe.
The signal generated by the sensor fitting S054 or S055 must be amplified供应德国BURKERT磁感式流量传感器，宝德流量传感器应用
您是第33231051位访客
公司主营：德国SICK传感器，FESTO比例阀，德国FESTO电磁阀，ASCO电磁阀，NORGREN电磁阀，LEUZE传感器，CKD电磁阀，CKD气缸 沪ICP备09006758号-10
乾拓贸易是销售气缸,继电器的公司,以SMC气缸,PILZ继电器,FESTO气缸为主,产品型号规格齐全,报价合理,可满足不同客户的需求!
版权所有：上海乾拓贸易有限公司
