021-39529839
电 话：028-86751041-8004
联系人：王倩
手 机：15308020014
地 址： 中国 上海 嘉定区嘉涌路99弄6号713
更新时间：2022-11-18 浏览数：29
所属行业：电子> 集成电路/IC> 接口 - 编码器，解码器，转换器
发货地址：-
产品规格：--
产品数量：1
包装说明：--
单 价：面议
好销量德国P+F电压电流转换器，V1-G-2M-PVC
上海乾拓贸易有限公司
企业QQ：2880626087
电话；-8019
手机；（微信）
邮箱；@163.com
地址：上海市嘉定区江桥嘉涌路99弄6号楼713
conveyor belts or other rotating components and then signal the speed status to the controller via logic outputs.
All devices include a startup override and an adjustable frequency limit.
vThe DIN rail mount converter provides LEDs for signal status display
and can convert NAMUR switching signals to PNP/NPN signals (200 mA, max. 1 kHz),
or convert a 3-wire sensor signal to a relay output (30 V DC or 230 V AC, 2 A, max. 10 Hz).
The products listed are not suitable for hazardous applications.
NPN or PNP sensors can be connected to the 2-channel isolated switch ampli? er with 2 change-over relay outputs (230 V AC, 4 A).
The ampli? er is suitable for bistable min./max. control, signal doubling or switching
PNP NC contact output KCD2-R NPN or PNP 3-wire input, change-over contact relay output
Model number Technical features KFA6-SR-2.3L.FA Isolated switch ampli? er for safe area applications
with galvanic isolation of inputs/output as per EN 50178, power supply 115/230 V AC
and 230 V AC NJ15+U1+DW1-1 NJ15+U1+DW1-10 NJ15+U1+DW1-100 Inductive rotational speed monitor in VariKont housing
with switching distance of 15 mm, frequency limit adjusted via potentiometer (up to 1/10/100 Hz,
depending on model), dimensions: 40 x 40 x 118 mm
KFU8-UFT-2.D.FA 2-channel signal converter up to 1 kHz, connection of NAMUR sensors or contacts,
2 relay outputs and one 0/4…20 mA current output, slip or rotational direction monitoring, w
idth of 40 mm, wide range power supply 24 V DC/115 V AC/230 V AC
SIGNAL CONVERTERS These devices convert SSI sensor signals with an input frequency of 100 Hz to 1 MHz
and serial RS232/485 signals into analog current values. During the conversion process,
the values are linearized via two interpolation points.
Model number Technical features K23-SSI/R2/IU-C SSI/RS232/RS485 signal converter,
2 galvanically isolated signals, and incorporates a 24 V DC power supply for the sensors.
Model number Technical features KCD2-E NAMUR input, NPN NO contact output KCD2-EL NAMUR input,
NPN NO contact output, with lead breakage detection KCD2-E1 NAMUR input, NPN NC contact output KCD2-E2 NAMUR input,
FREQUENCY CURRENT/VOLTAGE CONVERTER Signal converters are used to convert pulse
signals into analog current or voltage values for process controlling.
Model number Technical features KFD2-SR2-2.W.SM Standstill monitors in IP20 with a width of 20 mm,
frequency limit adjustable to 10 Hz with dip switch, rotational direction and slip monitor with second input,
2 relay outputs, PNP changeover contact, option of connecting NAMUR and 3-wire sensors,
24 V DC power supply, not suitable for hazardous applications
current and voltage output, scaleable pulse output, width of 40 mm, 4-way 7-segment display,
KFU8-DW-1.D Rotational speed monitor with width of 40 mm, frequency limit ad justable to 10 kHz via menu,
option of connecting NAMUR and 2/3/4-wire sensors, wide range power supply 24 V DC
PNP NO contact output KCD2-E2L NAMUR input, PNP NO contact output, with lead breakage detection KCD2-E3 NAMUR input,
analog current output, power supply 24 V DC K23-SSI/R2/25B-C SSI/RS232/RS485 signal converter,
parallel 25 bit output in gray code format, power supply 24 V DC
Compact sensor signal converter with built in terminals.
Single-channel signal converter up to 40 kHz, connection of 2/3/ 4-wire and NAMUR sensors,
Standstill and rotational speed monitors are used to monitor low speed limit or speed range for motors,
wide range power supply 24 V DC/115 V AC/230 V AC, not suitable for hazardous applications
好销量德国P+F电压电流转换器，V1-G-2M-PVC
您是第33143728位访客
公司主营：德国SICK传感器，FESTO比例阀，德国FESTO电磁阀，ASCO电磁阀，NORGREN电磁阀，LEUZE传感器，CKD电磁阀，CKD气缸 沪ICP备09006758号-10
乾拓贸易是销售气缸,继电器的公司,以SMC气缸,PILZ继电器,FESTO气缸为主,产品型号规格齐全,报价合理,可满足不同客户的需求!
版权所有：上海乾拓贸易有限公司
