电 话:028-86751041-8004
联系人:王倩
手 机:15308020014
地 址: 中国 上海 嘉定区嘉涌路99弄6号713

更新时间:2022-11-18 浏览数:34
所属行业:仪器仪表> 阀门> 真空阀门
发货地址:
产品规格:--
产品数量:1
包装说明:--
单 价:面议
美国世格真空阀系列电磁阀结构特点
上海乾拓贸易有限公司
电话:-8004
手机:(微信)
邮箱:@163.com
企业QQ:2880626084
联系人:杨江玲
地址:上海嘉定区嘉涌路99弄6号楼713室
Spare Parts Kit and replacement coils are available (see section 11)
-20 to +90°Cair, inert gas
NBR (nitrile / buna-n) FPM (fluorelastomer / viton)
MATERIALS IN CONTACT WITH FLUID (?) Ensure that the compatibility of the fluids in contact
(Other voltages and 60 Hz on request) AC (~) : 24V - 115V - 230V / 50 Hz
Waterproof enclosure with embedded screw terminal coil and Pg 13,5 cable gland to meet CEE-10 (IP 67)
fluids (?) temperature range (TS) sealings (?)
Plug with visual indication and peak voltage suppression or with 2m cable length (see section 11)
The valves can be mounted in any position without affecting operation
Valves have 2 mounting holes in body
Threaded pipe connection is standard: G (ISO 228/1)
The third digit in the catalogue number indicates the standard pipe connection
contamination The medium and high vacuum valves listed in this bulletin are mass spectrometer tested
Valves do not require a minimum operating pressure and are suitable for low, medium and high vacuum
Valve operation is not affected by mounting position
Special resilient materials and handling procedures are used in the high vacuum valves to avoid molecular
直动式,常闭,真空用途,黄铜阀体,介质温度:-20℃~+90℃,
with the materials is verified Body Brass Core tube Stainless steel Core and plugnut Stainless steel Spring
Stainless steel Seat Brass Sealings NBR or FPM Disc NBR or FPM Shading coil Copper
ambient temperature range (TS) protectioninrush ~ holding ~ = (VA) (VA) (W) (W)
(°C) CM6-FT 34,0 15,6 6,0 -20 to +75 moulded IP65
Other pipe connections are available on request
Installation/maintenance instructions are included with each valve
ELECTRICAL CHARACTERISTICS Coil insulation class F Connector Spade plug (Pg 11P)
Connector specification ISO 4400 Electrical safety IEC 335 Standard voltages DC (=) :
G螺纹,口径:1/4,操作压差:真空33.3/中1.33×10ˉ3/高1.33×10ˉ6(Mbar)
Solenoid valves satisfy all relevant EC directives
Explosionproof enclosures for hazardous locations according to "CENELEC" and national standards (see section 10)
Explosionproof and watertight enclosures according to "NEMA" standards (see section 10)
Compliance with "UL" and "CSA" standards
美国世格真空阀系列电磁阀结构特点