电 话:028-86751041-8004
联系人:王倩
手 机:15308020014
地 址: 中国 上海 嘉定区嘉涌路99弄6号713

简单介绍美国ASCO本安型防爆电磁阀
上海乾拓贸易有限公司
电话:-8004
手机:(微信)
邮箱:@163.com
企业QQ:2880626084
联系人:杨江玲
地址:上海嘉定区嘉涌路99弄6号楼713室
ELECTRICAL CHARACTERISTICS SAFETY CODE Standard voltages II 1G Ex ia IIC T6 (gas)
DC (=) : 24V nominal II 2D Ex iaD 21 T85°C IP65 (dust) A minimum current of 28 mA is necessary for optimal performance.
The minimum series resistance required is 200 Ohms.The nominal value of the resistance of the coil is 158 Ohms. (at 20 degrees C)
(V) (mA) (W) (mH) (μF ) Low power (LP) WPIS < 32 500 1,5 0 0 WSIS < 32 500 1,5 0 0
隔爆外壳存在间隙,因电气设备呼吸作用和气体渗透作用,使内部可能存在爆炸性气体混合物
Ingress protection degree IP65 Enclosure provided with integral strain relief for cables with an o.d. from 6 to 10 mm
A wide range of valves can be supplied with the operator
Application of the operator, located within hazardous areas, is not permitted without the addition of an approved
and classified device (such as barriers) located between the safe and hazardous area
The operator can be rotated 360° to select the most favourable position for cable entry
防爆电磁阀是把设备可能点燃爆炸性气体混合物的部件全部封闭在一个外壳内,
This highly efficient solenoid operates at very low power level (0.4W)
The continous duty class F polypropylene moulded spade plug connector coil contains moulded in solid state
components for switch-off peak voltage suppression, independent polarity connection and electronic enhancement
maximum ambient (1) temp. "T" classification T6 (G) 85°C (D) T5 (G) 100°C (D) T4 (G) 135°C (D) Low power (LP) 0,4 F 60°C
其外壳能够承受通过外壳任何接合面或结构间隙,渗透到外壳内部的可燃性混合物在内部爆炸而不损坏,
Explosion proof operator, intended for use in potentially explosive atmospheres, according to Directive ATEX 94/9/EC
EC type examination certificate (KEMA 98 ATEX 2544) and IECEx certificate (IECEx KEM 08.0017) are in compliance
with the International and European Standards IEC and EN: 60079-0, 60079-11, 60079-26, 61241-0 and 61241-11
TEMPERATURE CLASSIFICATION TABLES The minimum allowable ambient
并且不会引起外部由一种、多种气体或蒸气形成的爆炸性环境的点燃,
CONSTRUCTION Solenoid enclosure PP (polypropylene) Core, tube, springs & plugnut
Stainless steel Seals and discs NBR (nitrile) Riddering PTFE (polytetrafluoroethylene) Connector specification
ISO 4400 Nameplate Stainless steel Cartridge Welded, packless AISI 430 SS
适用于潜在爆炸环境,本安型,II 1 G/2 D Eex ia IIC T6 IP65 完全模制保护。
temperature is -40°C for the operator. Select the requested "T" classification from the temperature
classification tables (AC or DC), respecting the maximum ambient temperature and cold (20°C) electrical holding power values.
把可能产生火花、电弧和危险温度的零部件均放入隔爆外壳内,隔爆外壳使设备内部空间与周围的环境隔开。
Multi language installation/maintenance instructions are included with each valve
The solenoid operators can be mounted in any position without affecting operation简单介绍美国ASCO本安型防爆电磁阀