电 话:021-39526589-8004
联系人:覃小敏
手 机:19117262520
地 址: 中国 上海 嘉定区嘉涌路99弄6号713

更新时间:2022-11-18 浏览数:40
所属行业:化工> 阀门> 换向阀
发货地址:其他
产品规格:--
产品数量:1
包装说明:--
单 价:面议
日本YUKENDSG-03系列电磁换向阀结构特点
上海乾拓贸易有限公司
联系人:杨江玲
企业QQ:2880626083
手 机:(微信)
电 话:-8012
邮箱;@163.com
地址:上海市嘉定区江桥嘉涌路6号楼713室
They have, like other DC solenoids, such advantages that the sound in on-off operation is quite low
and the coils are hardly burnt out even if the spool is stuck at the half way of
These are epoch-making solenoid operated directional valves of high pressure,
high flow which have been developed incorporating a unique design concept
into every part of the valve including the solenoid. With wet type solenoids,
these valves ensure the low noise and the long life, moreover, ensure no leakage of oil outside of the valve.
Solenoids Solenoid Connectors (DIN connector) The solenoid connectors are conform to
the international standard ISO 4400 (Fluid power systems and components-Three-pin electrical
plug connectors-Characteristics and requirements). AC Solenoids 50 to 60 Hz
The products approved by CSA (Canadian Standards Association)
Standard type.....Useable at high pressure: 31.5 MPa (4570 PSI) and high flow: 120 L/min.
(31.7 U.S.GPM) Shockless type....A noise at spool changeover and a vibration in piping can be reduced to a minimum.
R Type Solenoids These are rectifier and surge absorber incorporated direct current
solenoids which can be used by connecting directly to the AC power source.
its changeover for contaminant particles etc. Moreover, they can be used almost permanently
without being affected by a surge voltage from the outside.
please consult us or your Yuken distributors.
3. Time lag for spool return after de-energisation of the solenoid is very short.
Thus, they are the solenoids of high reliability and durability.
Wide Range of Models Choose the optimum valve to meet your needs from a large selection available.
The DSG-03 50 design series solenoid operated directional valves are classified into the two basic models.
Stable Operation With a strong magnet and spring force, the valves are tough against
contamination and thus ensure a stable operation.
RQ Type Solenoids These are solenoids having the same features as R type solenoids above plus
such an additional feature that the time lag for the spool return after de-energisation of the
solenoid becomes considerably shortened. Insulation Class of Solenoid Class H
1. Since surge voltage can be controlled to a very low figure, electric control devices,
such as a computer, can be used without any interference like noise.
2. There being no spark between contacts, the life of the relay becomes longer.
and the products conforming to the Low Voltage Directive 73/23/ EEC
(amended by 93/68/EEC) are also available. For the details,
common service solenoids do not require rewiring when the applied frequency is changed.
DC Solenoids (Reputable K-series) These DC solenoids have surge absorbers for K-series functions.
The three advantages of them are as mentioned below:
日本YUKENDSG-03系列电磁换向阀结构特点