021-39529839
电 话：021-39526589-8004
联系人：覃小敏
手 机：19117262520
地 址： 中国 上海 嘉定区嘉涌路99弄6号713
更新时间：2022-11-18 浏览数：22
所属行业：化工> 阀门> 其他阀门
发货地址：
产品规格：--
产品数量：1
包装说明：--
单 价：面议
日本YUKEN叠加阀技术资料，MRP-01B-30
上海乾拓贸易有限公司
联系人：杨江玲
企业QQ：2880626083
手 机：（微信）
电 话：-8012
邮箱；@163.com
地址：上海市嘉定区江桥嘉涌路6号楼713室
Therefore, the stacking s equence in the drawing right (correct) is required in this combination. Assembly
Take 4 bolts from the mounting bolt kit and tighter them in the specified torque.
solenoid operated directional valves and a uniform thickness. Several of them
instructions for stacking sequence. Please note, that when designing a system using
modular stacking valves, due consideration should be given to working space for future maintenance.
Stacking sequence when using pilot operated check valves and throttle and check valves (metre-out).
In A to T flow in the drawing left (incorrect), pressure is g enerated
Keep all installation holes and clean. Failure to do this may cause fire due t o oil leakage.
Tightening to levels outside specifications may cause improper operation, damage, oil leakage, etc.
Assebly should be carried out in clean environment conditions and in accordance with the following procedure.
can be stacked and bolted together into a hydraulic circuit. Because of this compactest design,
the valves fit in a narrow space, so they are optimal for machine tools, work vehicles and labor-saving machines.
Caution in the selection of valves and circuit designing The selection of modular valves,
to suit a particular function or hydraulic circuit, are made in exactly the same
In some cases, the stacking system may be restricted, so please refer to the following
at part with a throttle effect of the throttle and check valve.
The pressure so generated acts to shut the pilot operated c heck valve and eventually
creates an open and shut operation of the valve repeatedly which may cause the cylinder to have
These modular valves have the same mounting surface as those for the DSG-005
Referring to the circuit diagram, stack up the modular v alves and solenoid operated directional valve,
while s etting their O-ring sides facing toward the mounting s ide and ensuring
Cautious attention should be paid to ensure that the valves
and their mounting surface are clean and free from dirt or other foreign materials.
a knocking effect (the same effect will occur in the case of B to T flow).
the correspondence between locating pin and pin slot.
way as conventional valves taking into account of the flow and pressure of each valve to be used.
CAUTION Before installing the product, be sure all specified bolts are tightened to the specified torque levels.
日本YUKEN叠加阀技术资料，MRP-01B-30
您是第33112682位访客
公司主营：德国SICK传感器，FESTO比例阀，德国FESTO电磁阀，ASCO电磁阀，NORGREN电磁阀，LEUZE传感器，CKD电磁阀，CKD气缸 沪ICP备09006758号-10
乾拓贸易是销售气缸,继电器的公司,以SMC气缸,PILZ继电器,FESTO气缸为主,产品型号规格齐全,报价合理,可满足不同客户的需求!
版权所有：上海乾拓贸易有限公司
