电 话:021-39526590
联系人:单荣兵
手 机:19117262520
地 址: 中国 上海 嘉定区嘉涌路99弄6号713
更新时间:2022-11-18 浏览数:13
所属行业:数码电脑> 无线网络设备> 功率放大器
发货地址:
产品规格:--
产品数量:1
包装说明:--
单 价:面议
性能介绍日本YUKEN功率放大器原装进口
上海乾拓贸易有限公司
联系人:杨江玲
企业QQ:2880626083
手 机:(微信)
电 话:-8012
邮箱;@163.com
地址:上海市嘉定区江桥嘉涌路6号楼713室
Power Input (Max.) Ambient Temperature External Setting Resistance Approx. Mass
them enclosed totally as they need to radiate t he heat from semiconductors or ICs inside.
Please use shielded wires for input signal transmission to prevent
FOR PROPORTIONAL ELECTROHYDRAULIC CONTROL VALVES
1 A (10 Solenoid) + 10 V DC 10 k 1 A / 5 V Variable 0.2 mA /°C ? ? 100 V AC,
Consisting of a centre-tapped trimmer (1 k -1 k ) and a dial, this setting adjuster is ideal for a servo system.
POWER AMPLIFIERS / SETTING ADJUSTERS
Instructions Power supply for the setting adjuster can be provided from this power amplifier,
but for only one. However, please use t he variable resistor or potentiometre of which impedance is 1 k
(in case of model SK1015, use 10 k) for the setting adjuster.
Multifunction Slope Controller
adjusters for general use and designs and manufactures special setting adjusters to order:
Instructions for Power Amplifiers The power amplifiers should be kept away from hot
and humid conditions which may deteriorate some components of t he power amplifiers.
They also should be installed in the clean and dry place where the vibration is minimal.
6-point Setting Adjuster
This is the simplest setting adjuster, consisting of a trimmer (1 k ) and a dial.
This multifunction slope controller generates any desired 2-channel analog voltage pattern outputs.
It can also be used with slope-proportional and timeproportional systems.
Type Model Numbers Page Function
Feedback Type DC Input Feedback Type DC Input Type Max. Output Current Max. Input Voltage
Feedback Voltage Input Impedance Max. Gain Dither Temperature Drift (Max.)
Please avoid to install the power amplifiers in the complete enclosure or get
the amplifiers from any interference such as noise from outside.
SK1022-A-?-11 SK1022-B-?-11 SK1015-11 DC Input TypeType of Fuction DC Input
Six trimmers are incorporated, so it is possible to set six points.
The setting adjuster supplies the command signal voltage to the power amplifier.
Manually Operated Setting Adjuster
Since the setting adjuster is closely related to actual machine operating procedure,
the user generally provides this device. Yuken makes the following standard setting
性能介绍日本YUKEN功率放大器原装进口