021-39529839
电 话：021-39529829-8004
联系人：冯娇
手 机：17316599802
地 址： 中国 上海 嘉定区嘉涌路99弄6号713
更新时间：2026-05-29 浏览数：43
所属行业：机械设备> 气动元件(机械、工业制品、行业设备)> 气缸
发货地址：
产品规格：--
产品数量：1
包装说明：--
单 价：面议
日本SMC锁紧气缸特征，SY5120-5GD-01-F2
上海乾拓贸易有限公司
联系人：杨江玲
企业QQ：2880626083
手 机：（微信
电 话：-8012
邮箱；@163.com
地址：上海市嘉定区江桥嘉涌路6号楼713室
特长：
实现瞬间锁紧活塞杆，以实现中间位置锁紧功能。
160、200、250、320MM，行程可任意定做。
适合中间停止、急停、落下防止用的锁紧气缸。(双向锁紧)
带磁性开关(CDL□系列：CDLJ2、CDLM2、CDLG1、CDL1)
锁紧气缸，气缸端部加装锁紧装置，当气缸运行至中间某一位置时，
通过电磁阀的控制，端部锁紧装置可以
固定方式有基本型，前法兰FA，后法兰FB，
后单耳CA，后双耳CB，前后脚架LB，中间轴肖TC
带锁气缸，又称端部带锁气缸，分前端带锁SCLF及后端带锁SCLB
两种，可保证气缸在断气情况下自动锁紧，
有效防止坠落，安全可靠有保障。
带锁气缸缸径分40、50、63、80、100、125、
安全注意：
In such a situation, there is a risk of injury to humans, or equipment damage.
air is applied to only one side of the cylinder,
and make selections based on the holding force of the spring locked state.
Do not use the pneumatic lock for drop prevention purposes.
? Lock-up series (Series CL1) 50% or less of the holding force (maximum static load)
To prevent the piston from lurching, use a balance circuit such as the recommended pneumatic circuit
(P. 598). If an air-hydro fine lock cylinder is used,
Fine lock series (Series CLJ2/CLM2/ CLG1) 35% or less of the holding force
(maximum static load) Note) For applications such as drop prevention,
Construct so that the human body will not come into direct contact with driven objects
or the moving parts of locking cylinders.
简介：
If there is a risk of contact, provide safety measures such as a cover
consider situations in which the air source is shut off,
If the lock is applied at a desired position of a stroke and compressed
or a system that uses sensors that will activate an emergency stop before contact is made.
make sure to operate the lock portion through air pressure.
Never use oil on the lock-up cylinder because the lock-up cylinder is a non-lube style.
Failure to observe this could cause the lock to malfunction.
2. Use a balance circuit in which lurching of the piston is taken into consideration.
the piston will lurch at a high speed the moment the lock is disengaged.
产品图片:
日本SMC锁紧气缸特征，SY5120-5GD-01-F2
您是第33824752位访客
公司主营：德国SICK传感器，FESTO比例阀，德国FESTO电磁阀，ASCO电磁阀，NORGREN电磁阀，LEUZE传感器，CKD电磁阀，CKD气缸 沪ICP备09006758号-10
乾拓贸易是销售气缸,继电器的公司,以SMC气缸,PILZ继电器,FESTO气缸为主,产品型号规格齐全,报价合理,可满足不同客户的需求!
版权所有：上海乾拓贸易有限公司
