电 话:028-86751041-8004
联系人:王倩
手 机:15308020014
地 址: 中国 上海 嘉定区嘉涌路99弄6号713

更新时间:2022-11-18 浏览数:51
所属行业:化工> 阀门> 电磁阀
发货地址:
产品规格:--
产品数量:1
包装说明:--
单 价:面议
YUKEN日本品牌DSG-005系列电磁换向阀

概述:
When energising one solenoid, be sure to de-energise another solenoid beforehand.
while contributing further to a space saving requirement.
the manual override push pin turns hard to ope-rate. (see the graph below).
(3630 PSI) and a maximum flow rate of 10 L/min (2.6 U.S.GPM),
Please note that as the back pressure of the tank line rises,
Moreover, using wet armature solenoids, the valves ensure the long life.
valves are the pro- ducts newly developed as a "Mini-series".
Compared with DSG-01 series, t he valves are much more compactly
These DSG-005 series solenoid operated directional
manufactured but enjoy a maximum operating pressure of 25 MPa
性能参数:
(100-930 SSU), Temperature: -15 to+60°C (5 to 140°F).
Due caution must be paid to maintaining control over contamination of
Use phosphate ester or polyol ester fluid.
When phosphate ester fluid is used, prefix "F-" to the model
Always be sure to use hydraulic fluids within the stipulated
conditions shown below: 2 Viscosity: 20-200 mm /s
number because the special seals (fluororubber) are required to be used.
Use water-glycol fluids or W/O emulsion type fluids.
the hydraulicfluids which may otherwise lead t o breakdowns and shorten
Use fluids equivalent to ISO VG 32 or VG46.
the life of the valve. Please maintain the degree of contamination
within NAS 1638-Grade 1 1. Use 20 μm or finer line filter.YUKEN日本品牌DSG-005系列电磁换向阀