电 话:021-39526589-8004
联系人:覃小敏
手 机:19117262520
地 址: 中国 上海 嘉定区嘉涌路99弄6号713
更新时间:2022-11-18 浏览数:204
所属行业:化工> 阀门> 换向阀
发货地址:其他
产品规格:--
产品数量:1
包装说明:--
单 价:面议
详细描述YUKENG系列无冲击型电磁换向阀

简述:
incorporate electronic circuits to enable adjustment of the spool
shifting time. As the shifting time of the G-Series valves can be adjusted,
it can be set at an optimal level to minimise shocks to the m achin
The G-Series Solenoid Operated Directional Valves
there is a possibility that the knocking will arise on the pilot
controlled check valve during deceleration depending on the largeness of load inertia,
the state of piping and t he length of "Off T" time etc.
In a hydraulic circuit where a pilot controlled check valve is used,
特点:
lead to breakdowns and shorten the life of the valves.
Please maintain the degree of contamination
Viscosity ranging between 15 - 200 mm /s (77 - 927 SSU).
use flow control valves. I n G-series solenoid controlled pilot
Due caution must be paid to maintaining control over
The G-Series Solenoid Operated Directional Valves cannot be adjusted
for maximum flow rates. To adjust maximum flow rates,
Use hydraulic fluids which satisfy the recommended
can be adjusted by use of the valve with stroke adjustment screw of optional extra.
within NAS 1638Grade 12. Use 25 μm or finer line filter.
contamination of the hydraulic fluids which may otherwise
viscosity and oil temperatures given above.
operated directional valves (G-DSHG-04/06), the maximum flow rate
Oil temperatures between -15/+60°C (5 - 140°F). 详细描述YUKENG系列无冲击型电磁换向阀