021-39529839
电 话：021-39526589-8004
联系人：覃小敏
手 机：19117262520
地 址： 中国 上海 嘉定区嘉涌路99弄6号713
更新时间：2022-11-18 浏览数：129
所属行业：化工> 阀门> 溢流阀
发货地址：
产品规格：--
产品数量：1
包装说明：--
单 价：面议
油研先导式溢流阀选型依据，SB1210-06-28-1002
特点：
within NAS 1638-Grade 12. Use 25 μm or finer line filter.
(77 - 1800 SSU). Oil temperatures
Due caution must be paid to maintaining control
over contamination of the hydraulic fluids which may
viscosity and oil temperatures given above.
otherwise lead to breakdowns and shorten the life of the valves.
Please maintain the degree of contamination
between -15/+70°C (5 - 158°F).
Use hydraulic fluids which satisfy the recommended
Viscosity ranging between 15 - 400 mm /s
介绍：
and the length of the pipe. Pressure is limited by collars fitted.
and 06 with a flow rate above 8 L/min (2.1 U.S. GPM)
One collar is equivalent to 10 MPa (1450 PSI). With a small flow,
see page 3. In addition, if the internal volume of the vent line is too large,
They can be connected each other in-line; one as inlet
chattering is likely to occur. Thus, as far as possible reduce the inside Dia.
If a working pressure cannot be attained, remove some collars.
and the other as an outlet or the valve can be used by plugging one of the pressure ports.
the setting pressure may be unstable. Use models numbered 03
and model 10 with 15 L/min (4.0 U.S. GPM). There are two threaded connection pressure ports.
If a remote control relief valve is used in the vent circuit,
油研先导式溢流阀选型依据，SB1210-06-28-1002
您是第33111272位访客
公司主营：德国SICK传感器，FESTO比例阀，德国FESTO电磁阀，ASCO电磁阀，NORGREN电磁阀，LEUZE传感器，CKD电磁阀，CKD气缸 沪ICP备09006758号-10
乾拓贸易是销售气缸,继电器的公司,以SMC气缸,PILZ继电器,FESTO气缸为主,产品型号规格齐全,报价合理,可满足不同客户的需求!
版权所有：上海乾拓贸易有限公司
