021-39529839
电 话：021-39526590
联系人：单荣兵
手 机：19117262520
地 址： 中国 上海 嘉定区嘉涌路99弄6号713
更新时间：2022-11-18 浏览数：39
所属行业：机械设备> 气动元件(机械、工业制品、行业设备)> 其他气动元件
发货地址：
产品规格：--
产品数量：1
包装说明：--
单 价：面议
dbs10hg700013oo，安装海隆顺序阀，泄压阀
产品介绍
pressure relief valves ng 10, 25 and 32
indirectly-controlled, interface to din 24 340 and iso 6264
sequence valves ng 10, 25 and 32
indirectly-controlled, interface of pressure relief valve to din 24 340 and iso 6264
pn [pmax.] = 315 bar 7501401.06.01.0
deion (standard units)
design
the pressure relief valves of type d b s and the sequence valves of type d z s are indirectly-controlled seat valves.
actuation
the pressure is set manually by means of a rotary knob. the setting can, if desired,
be safeguarded by means of locking (e-10-closure) or by means of a lead seal.
mounting
the units are bolted on subplates and sealed by o-rings.
line connection
subplate, interface to din 24 340 and iso 6264
features? high flow rating
? insensitive to vibration
? seat design insensitive to dirt
type code
pressure relief valve
d ... s ... ... ... ... 001 ... o ...
1 2 3 4 5 6 7
1 operating b – pressure relief valve characteristics: z – sequence valve
2 nominal size ng: 10
25
32
3 actuation: h – manual setting
hv – manual setting, lockable
hk – set-screw with cover (can be lead sealed)
4 line connection: g – subplate, interface to
din iso
d – subplate, interface to din iso (valve interface not to din iso)
5 pressure 70 – up to 100 bar setting range: 90 – up to 315 bar
6 engineering 3 – ng 10
version: 2 – ng 25
5 – ng 32
7 sealing material o – perbunan
v – viton
subplate
p db1) ... g ... 001 ... o o
1 2 3
1 nominal size ng: 10
25
32
2 line connection: 4 – g 1/2 ng 10
6 – g 1 ng 25
8 – g 1 1/2 ng 32
(internal to
din iso 228/1)
3 engineering version: 1
1) when using subplate for the installation of sequence valves, make sure to remove screw plug at port ?y
herion systemtechnik gmbh
untere talstra?e 65
d-71263 weil der stadt-merklingen
tel.: + 49 (0) 70 33 / 30 18 - 0
fax: + 49 (0) 70 33 / 30 18 - 10
.herion-systemtechnik.de info@herion-systemtechnik.de
parameters according to vdi 3276
type designation d b s 10..g. d b s 25..g. d b s 32..g. d z s 10..g. d z s 25..g. d z s 32..g.
general parameters
designation pressure relief valve sequence valve
symbol
complete
simplified
design seat valve, indirectly-controlled
type of mounting flange
line connection subplate
mounting position optional
flow direction from p to t
actuation manual setting
weight [kg] 6,5 8,6 14,2 6,5 8,6 14,2
weight of subplate [kg] 2 4,7 7,5 2 4,7 7,5
ambient temperature range ?u [°c] –20 ... +50
nominal size ng 10 25 32 10 25 32
hydraulic parameters
operating pressure range pe [bar] ... 315
adjustable pressure range pv [bar] pv min.: see characteristic curve pv max.: pressure stage 70: ... 100
pressure stage 90: ... 315
pressure fluid temperature ?m max. [°c] +70
viscosity range ? [mm2/s] 12 ... 500
flow q [l/min] see characteristic curves
control oil qst [l/min] 0,5 see characteristic curve qst
中文介绍
泄压阀ng 10、25和32
间接控制，接口符合din 24 340和iso 6264
顺序阀ng 10、25和32
接控制，安全阀接口符合din 24 340和iso 6264
pn [pmax。] = 315巴7501401.06.01.06
说明（标准单位）
计
d b s型的泄压阀和d z s型的顺序阀是间接控制的座阀。
致动
压力通过旋钮手动设置。如果需要，可以通过锁定（e-10-闭合）或通过铅封保护设置。
安装
这些装置用螺栓固定在底板上，并用o形圈密封。
线路连接
底板，符合din 24 340和iso 6264的接口。
型号
d b s 10 h g 70 001 3 oo
d b s 10 h g 90 001 3 oo
d b s 25 h g 70 001 2 oo
d b s 25 h g 90 001 2 oo
d b s 32 h g 70 001 5 oo
d b s 32 h g 90 001 5 oo
dbs10hg700013oo，安装海隆顺序阀，泄压阀
您是第27814279位访客
公司主营：德国SICK传感器，FESTO比例阀，德国FESTO电磁阀，ASCO电磁阀，NORGREN电磁阀，LEUZE传感器，CKD电磁阀，CKD气缸 沪ICP备09006758号-10
乾拓贸易是销售气缸,继电器的公司,以SMC气缸,PILZ继电器,FESTO气缸为主,产品型号规格齐全,报价合理,可满足不同客户的需求!
版权所有：上海乾拓贸易有限公司
