电 话:028-86751041-8004
联系人:王倩
手 机:15308020014
地 址: 中国 上海 嘉定区嘉涌路99弄6号713

更新时间:2022-11-18 浏览数:33
所属行业:电子> 传感器、敏感元器件(电子元器件)> 电流电压传感器
发货地址:日本
产品规格:--
产品数量:100
包装说明:--
单 价:面议
OMRON光纤光泽传感器 E3X-NA11
光纤光泽传感器
E3X-NL
采用欧姆龙的偏光多层膜技术(FAO)可不受工件的色差影响,对细微的光泽进行稳定地检测
该页面所登载的内容是基于生产终止以前的产品样本制作而成的参考信息,产品的特点/种类/规格/配件等可能与现在所使用的不同。请在使用时确认系统的兼容性及安全性。
采用欧姆龙的偏光多层膜技术(FAO)可不受工件的色差影响,对细微的光泽进行稳定地检测

OMRON光纤光泽传感器 E3X-NA11
E3X-NL
2012-03-31
E3X-DA-S
E3S-X series
- The material will be changed to PBT from zinc die cast.
- Degree of protection of the recommended exchange model is IP66 with protective cover.
When using it without the protection cover, there is no water protection.
E3X-NL series
- The recommended replacement is a normal type of the fiber amplifier sensor, whereas the conventional one
a grossness detection type. So, the customers are requested to confirm the feasibility about whether
or not the replacement is able to match the concerned application.
- The customers are requested to check the installation dimensions because the outline dimensions of the
current model are different from the outline dimensions of the replacement.
- Please replace the amplifier along with the fiber unit to make sure the sensing performance.
E3X-NM series, E39-G9
- The use of two units will be needed because the output channels with the replacement are decreased from
4 channels to 2 channels with conventionals.
- The remote input function will be eliminated.
- In the case that the customers are using a reflective fiber where the insertion entrance is an integrated type,
the customers are needed to change the fiber unit because the pitch at the fiber insertion position of the
replacement is different from that that of the conventional's.
OMRON光纤光泽传感器 E3X-NA11