021-39529839
产品分类
联系方式

电 话:021-39526589-8004

联系人:冯娇

手 机:17316599802

地 址: 中国 上海 嘉定区嘉涌路99弄6号713

产品详情 当前位置: 首页>产品中心

SMC日本品牌表面电位传感器产品说明

更新时间:2026-05-29   浏览数:40

所属行业:电子> 传感器、敏感元器件(电子元器件)> 其他传感器、敏感元件

发货地址:

产品规格:--

产品数量:1

包装说明:--

单 价:面议

  SMC日本品牌表面电位传感器产品说明

  上海乾拓贸易有限公司

  电话:-8004

  手机:(微信)

  邮箱:@163.com

  企业QQ:2880626084

  联系人:杨江玲

  地址:上海嘉定区嘉涌路99弄6号楼713室

  Accuracy (for readings) (25°C)

  通过自动平衡传感器控制离子平衡。

  Output current: 4 to 20 mA (with rated pressure range) Max. load impedance: 600 Ω (at 24 VDC), Min. load impedance: 50 Ω

  Hysteresis mode: Variable Window comparator mode: Variable

  on the detection distance. For details on the relationship in the detection distance

  between the measured potential and the output voltage, refer to the graph in “Technical Data - Output Signal” on page 1085.

  高精度型:正确调节工件位置的离子平衡。

  89/336/EEC, 92/31/EEC, 93/68/EEC, 2004/108/EC UL508

  Accuracy (for readings) (25°C)

  NPN or PNP open collector: 2 outputs 80 mA 30 VDC (with NPN output) 1 V or less (with load current of 80 mA) With short circuit protection

  Max. load current Max. applied voltage Residual voltage Short circuit protection Response time (including sensor response time)

  100 ms or less Response time with anti-chattering function: 500 ms, 1 s, 2 s or less Output voltage: 1 to 5 V

  (with rated pressure range), Output impedance: Approx. 1 kΩ ±1% F.S. or less

  除电时间0.3秒。

  ±1% F.S. or less

  200 ms (without filter), 1.5 s (with filter) or less

  ±0.5% F.S. ±1 digit or less 3 + 1/2 digit, 7-segment indicator, 2-color display (Red/Green)

  EMC directive UL standard

  IZD10-110 ±0.4 kV (at detection distance: 25 mm)Note)

  10 to 50 mm ±5% F.S. (0 to 50°C, at detection distance: 25 mm)

  Note) The relationship between the measured potential and the output voltage varies depending

  本体安装型:根据检测接地返回电流,调整静电消除器安装状态可使用。

  Power supply, Output connection: 5-pin connector, Sensor connection: 4-pin connector Front case: PBT, Rear case: PBT 30 g CE marking, UL (CSA) compliant

  10 to 150 Hz at whichever is smaller of 1.5 mm amplitude or 98 m/s2 acceleration, in X, Y, Z direction for 2 hrs. each (De-energized)

  Connection sensor Rated measurement range Min. unit setting Measurement distance setting Power supply voltage Current consumption Sensor input

  Temperature characteristics Connection method Material Mass (excluding power supply/output connection cable) Standards

  Response time (including sensor response time)

  Enclosure Operating temperature range Operating humidity range Withstand voltage Insulation resistance

  可根据用途选择电极针。

  Protective class : Class III (EN60950-1) Pollution Degree 3 CE marking : Low voltage directive :

  73/23/EEC, 93/68/EEC Only when connected to a SELV-type external circuit.

  IZD10-510 ±20 kV (at detection distance: 50 mm)Note)

  25 to 75 mm ±5% F.S. (0 to 50°C, at detection distance: 50 mm) 100 ms or less 24 VDC ±10% 40 mA

  or less 0 to 50°C 35 to 85% Rh (with no condensation) Head case : ABS Amplifier case : ABS Durability 50 Hz

  Amplitude 1 mm X, Y, Z each 2 hours 100 m/s2 185 g (including cable mass)

  3类传感器可供选择。

  Operating ambient humidity Material Vibration resistance Shock resistance Mass

  Compliance with EN standards

  IZD10-110 –0.4 kV to +0.4 kV Note 1) 0.001 kV 10 to 50 mm

  通过反馈传感器可高速除电。

  Sampling cycle: 5 times/s OUT1: Illuminates when output is turned ON (Green), OUT2:

  Illuminates when output is turned ON (Red). IP40 Operating: 0 to 50°C, Stored: –10 to 60°C

  (with no freezing or condensation) Operating/Stored: 35 to 85% RH (with no condensation)

  1000 VAC for 1 min, between live parts and housing 50 MΩ or more (with 500 VDC Mega), between live parts and housing

  100 m/s2 in X, Y, Z directions 3 times each (De-energized) ±0.5% F.S. or less (based on 25°C)

  重视除电速度的高速除电型。

  低维护型。

  Note 1) Rated value when the distance between the charged object and the sensor is 25 mm Note 2)

  Rated value when the distance between the charged object and the sensor is 50 mm

  24 VDC, Ripple (p-p) 10% or less (with power supply polarity protection) 50 mA or less

  (excluding sensor unit’s current consumption) 1 to 5 VDC (Input impedance: 1 MΩ) 1 input With excess voltage protection (up to 26.4 V)

  检测工件静电电位,输出开关量和模拟电压。

  Model Potential measurement Output voltage Effective detection distance Linearity Output delay time

  Power supply voltage Current consumption Operating ambient temperatureSMC日本品牌表面电位传感器产品说明

上海乾拓贸易有限公司
冯娇07:33:29
您好,欢迎光临上海乾拓贸易有限公司,请发送您要咨询的内容。
欢迎访问
上海乾拓贸易有限公司
很高兴能为您服务!
客服 021-39526589-8004
扫一扫
在线咨询
服务热线
021-39526589-8004
17316599802