021-39529839
电 话：028-86751041-8004
联系人：王倩
手 机：15308020014
地 址： 中国 上海 嘉定区嘉涌路99弄6号713
更新时间：2024-12-20 浏览数：26
所属行业：机械设备> 气动元件(机械、工业制品、行业设备)> 气缸
发货地址：日本
产品规格：--
产品数量：1
包装说明：--
单 价：面议
CXSWM25-50-Y59AL,SMC微型带导杆气缸
For the rotational torque (T) added to the plate (rod end), use a value no more
than the values in the table. Operation outside of this range may cause excessive
impact, which may result in the damage to the devices.
Use a watchmakers screw driver with a handle about 5 to 6 mm in diameter
when tightening the auto switch mounting screw.
? Tightening torque of auto switch mounting screw should be set 0.10 to 0.20 N.m.
Proof pressure
电话：
传真：转8008
手机：
Maximum operating pressure
Minimum operating pressure
Ambient and fluid temperature
Piston speed
Thread tolerance
Stroke length tolerance
–10 to 60°C (with no freezing)
Rubber bumper at both ends
Note) Within allowable kinetic energy use only
50 to 500 mm/s Note)
When driving the cylinder with inertial load, keep kinetic
energy no more than the allowable value. The area
between bold lines in the below graphic shows the
relation between load weight and maximum speed
·
您是第33150716位访客
公司主营：德国SICK传感器，FESTO比例阀，德国FESTO电磁阀，ASCO电磁阀，NORGREN电磁阀，LEUZE传感器，CKD电磁阀，CKD气缸 沪ICP备09006758号-10
乾拓贸易是销售气缸,继电器的公司,以SMC气缸,PILZ继电器,FESTO气缸为主,产品型号规格齐全,报价合理,可满足不同客户的需求!
版权所有：上海乾拓贸易有限公司
