电 话:028-86751041-8004
联系人:王倩
手 机:15308020014
地 址: 中国 上海 嘉定区嘉涌路99弄6号713

更新时间:2024-12-20 浏览数:185
所属行业:仪器仪表> 压力仪表> 压力开关
发货地址:日本
产品规格:--
产品数量:1
包装说明:--
单 价:面议
SMC压力开关说明书 ISE30-C6H-28
复制主传感器的设置到从传感器。
此功能是自动计算的基础上持续运行一个粗略的设定值。
找齐了在显示值的偏差。

可以保留测量过程中显示的大压力值。
可以保留在测量过程中所显示的小压力值。
键板可以被锁定,以防止任何不正确的操作开关的功能。
压力显示可设置在零当压力向大气开放。
防止可能的故障,由于在初级压力的突然波动,通过调整反应时间。
可以将显示值。
SMC压力开关说明书 ISE30-C6H-28
降低功耗。
从1/1000至1/100正常值显示分辨率转换。
它减少了显示器闪烁。
千帕和兆帕之间的转换单元。
Copies the settings of the master sensor to the slave sensors.
This function is to calculate a rough set-value automatically based on the on-going operation.
Evens out deviations in the displayed value.
Can retain the maximum pressure value displayed during measurement.
Can retain the minimum pressure value displayed during measurement.
The key board can be locked to prevent any incorrect function of the operation switch.
The pressure display can be set at zero when the pressure is open to the atmosphere.
Prevents possible malfunction due to sudden fluctuations in the primary pressure by adjusting the response time.
Can convert the display value.
Reduces power consumption.
Converts display resolution from the normal value of 1/1000 to 1/100.
It reduces the monitor to flicker.
Converts the unit between kPa and MPa.
SMC压力开关说明书 ISE30-C6H-28