电 话:028-86751041-8004
联系人:王倩
手 机:15308020014
地 址: 中国 上海 嘉定区嘉涌路99弄6号713

更新时间:2024-12-20 浏览数:32
所属行业:机械设备> 气动元件(机械、工业制品、行业设备)> 气缸
发货地址:日本
产品规格:--
产品数量:100
包装说明:--
单 价:面议
SMC双作用系列无杆气缸 CDJ2RA10-40-B
双作用/系列CJP2
全长:6至9.5毫米缩短
重量:由55至65%减少
新的铝制车身的重量轻比较
与传统的CJP系列。
(与基本型CJP缸无磁性开关相比)

Double acting /Series CJP2
Full length: Shortened by 6 to 9.5 mm
Weight: Reduced by 55 to 65%
New aluminum body is light weight compared
with the conventional CJP series.
(Compared with the basic model CJP cylinder without auto switch)
SMC双作用系列无杆气缸 CDJ2RA10-40-B
当找到一个惯性负载,操作与动能的气缸内的允许值。在该范围内
下面的图表是由粗实线表示划定装载质量和大驱动之间的关系
速度。
严格遵守活塞杆横向负荷的极限范围。 (请参见下面的图)。如果这个产品是用
超越极限,它可能会缩短机器的使用寿命或造成损坏
When driving an inertial load, operate a cylinder with kinetic energy within the allowable value. The range in the
chart below that is delineated by bold solid lines indicates the relation between load mass and maximum driving
speeds.
Strictly observe the limiting range of lateral load on a piston rod. (Refer to the below graph.) If this product is used
beyond the limits, it may shorten the machine life or cause damage
SMC双作用系列无杆气缸 CDJ2RA10-40-B