电 话:028-86751041-8004
联系人:王倩
手 机:15308020014
地 址: 中国 上海 嘉定区嘉涌路99弄6号713

更新时间:2024-12-20 浏览数:62
所属行业:机械设备> 气动元件(机械、工业制品、行业设备)> 气源处理器
发货地址:日本
产品规格:--
产品数量:100
包装说明:--
单 价:面议
SMC分离设备水滴分离器 AMJ3000-02B-J
该元件应更换经过2年的使用,或之前
压力下降到0.02兆帕(0.2千克力/平方厘米)。
间隔件和O形圈也应该在相同的取代
时间,该元素将被替换。
有时,当碗,相比于其它目的去除

更换元件,间隔件可能会粘在碗和
剥离。然而,在这种情况下,可能会返回到其
安装位置,并再次使用。
排水应由它到达的时间被排出
上限。
此外,当排水被排出或
元素取代,首先确认所有设备等是
停止,并返回碗到大气的内部
在继续之前的压力。
SMC分离设备水滴分离器 AMJ3000-02B-J
The element should be replaced after 2 years of use, or before
the pressure drops to 0.02 MPa (0.2 kgf/cm2).
The spacer and O-ring should also be replaced at the same
time that the element is replaced.
Sometimes when the bowl is removed for a purpose other than
replacing the element, the spacer may stick to the bowl and
come off. In this case however, it may be returned to its
installed position and used again.
Drainage should be discharged by the time it reaches the
upper limit.
Furthermore, when drainage is to be discharged or the
element replaced, first confirm that all equipment, etc is
stopped, and return the interior of the bowl to atmospheric
pressure before proceeding.
SMC分离设备水滴分离器 AMJ3000-02B-J