电 话:028-86751041-8004
联系人:王倩
手 机:15308020014
地 址: 中国 上海 嘉定区嘉涌路99弄6号713

更新时间:2024-12-20 浏览数:63
所属行业:机械设备> 机床附件(机械、工业制品、行业设备)> 吸盘
发货地址:日本
产品规格:--
产品数量:100
包装说明:--
单 价:面议
SMC吸盘产品规格尺寸 ZPT63HSJ50-B01-A18真空
在情况下的工件较重或危险
对象等,采取措施,以解决可能的损失
的吸附力(安装防滴的引导等)。
在运输用真空吸附的真空的情况下

垫,吸附力时,有在真空下降丢失压力。
此外,由于真空压力也可能恶化因
从管道穿和焊盘开裂,并真空泄漏等,
是一定要执行的真空设备维护。
SMC吸盘产品规格尺寸 ZPT63HSJ50-B01-A18真空
In case where the workpieces are heavy or dangerous
objects, etc., take measures to address a possible loss
of adsorption force (installation of drop prevention
guide, etc.).
In the case of transportation by vacuum adsorption using vacuum
pads, adsorption force is lost when there is a drop in vacuum
pressure.
Furthermore, since vacuum pressure can also deteriorate due to
wear and cracking of pads, and vacuum leakage from piping, etc.,
be certain to perform maintenance on vacuum equipment.
从插入垫的底部六角扳手,松开
螺钉和从适配器删除旧的垫。
放置在一个新垫
适配器,并确认后
O形圈到位,
重新拧紧的螺丝
六角扳手。
Insert a hexagon wrench from the bottom of the pad, loosen the
screw and remove the old pad from the adapter.
Place a new pad on the
adapter, and after confirming
that the O-ring is in place,
retighten the screw with the
hexagon wrench.
SMC吸盘产品规格尺寸 ZPT63HSJ50-B01-A18真空