021-39529839
电 话：028-86751041-8004
联系人：王倩
手 机：15308020014
地 址： 中国 上海 嘉定区嘉涌路99弄6号713
更新时间：2024-12-20 浏览数：34
所属行业：机械设备> 气动元件(机械、工业制品、行业设备)> 气缸
发货地址：
产品规格：--
产品数量：100
包装说明：--
单 价：面议
SMC双活塞气爪缸 MHL2-20D-Y59A防尘设计
要设置自动切换，将自动切换到安装
气缸槽如下所示并大致设置。
将自动切换到自动开关支架的安装槽。
压脚提升确认检测位置，拧紧固定螺丝（M2.5）
ttached的自动切换，并设置它。
一定要改变状态的检测位置（2）。
To set the auto switch, insert the auto switch into the installation
groove of the cylinder as shown below and set it roughly.
Insert the auto switch into the auto switch bracket installation groove.
fter confirming the detecting position, tighten the set screws (M2.5)
ttached to the auto switch and set it.
Be sure to change the detecting position in the state of (2).
SMC双活塞气爪缸 MHL2-20D-Y59A防尘设计
CD85F16-10-B
CD85N25-40-A
MHL2-20D2
MHL2-20D-Y59A
MHL2-16D2
MHL2-20D1/D2
MHL2-25D1/D2
MHL2-10D
MHL2-10D1
MHL2-10D2
Make sure that the piston rod is retracted so as
not to apply undue strain on the piston rod while
an attachment is being mounted to the finger.
Do not scratch or dent the sliding portion of the
piston rod. Damage to the bearings or seals
may cause air leaks or faulty operation.
Refer to the table below for the proper tightening
torque on the bolt used for securing the
attachment to the finger.
SMC双活塞气爪缸 MHL2-20D-Y59A防尘设计
您是第33140209位访客
公司主营：德国SICK传感器，FESTO比例阀，德国FESTO电磁阀，ASCO电磁阀，NORGREN电磁阀，LEUZE传感器，CKD电磁阀，CKD气缸 沪ICP备09006758号-10
乾拓贸易是销售气缸,继电器的公司,以SMC气缸,PILZ继电器,FESTO气缸为主,产品型号规格齐全,报价合理,可满足不同客户的需求!
版权所有：上海乾拓贸易有限公司
